Montreal Seasoned Instant Pot Roast Beef Tenderloin

As the Montreal seasoning toasts under high heat and the Instant Pot fills with peppery, garlicky steam, the beef tenderloin takes on a deep browned crust with a juicy, rosy center. This version works because it’s properly seared first, pressure-cooked just long enough to stay tender, and then rested so the juices settle. You’ll be able to follow each timing step with confidence, even if you’re new to pressure cooking.

This Instant Pot Montreal seasoned roast beef tenderloin delivers juicy, tender slices with way less fuss than traditional roasting. Sear the tenderloin, pressure cook with a splash of broth, then finish to your preferred doneness using internal temperature (not guesswork)—the result is evenly cooked slices that look restaurant-worthy without the long oven wait.

If you want a roast that feels “special occasion” but fits a weeknight schedule, this one’s for you. It’s also great when you don’t want to watch the oven window all evening.

Recipe Overview

🛒 Buy Best Cast Iron Skillet Now on Amazon
Overview of Montreal seasoned instant pot roast beef tenderloin recipe with ingredients and cooking steps.

– Montreal seasoning brings that signature peppery, garlicky flavor right into the meat.

– Instant Pot tenderizes while keeping the outside nicely seasoned (especially if you sear first).

– Best for: tenderloin roasts that are around 2 to 3 inches thick and meant to be sliced for serving.

This method works particularly well for beef tenderloin because it cooks quickly and responds strongly to carryover temperature during resting. As of 2026, pressure-cooking remains one of the most repeatable ways to hit a tender interior without constant checking. For a typical 2.5 lb tenderloin, you can comfortably serve about 6 people with thick slices.

🛒 Buy Best Instant Read Meat Thermometer Now on Amazon

Time Required

A clock showing time required for cooking Montreal seasoned Instant Pot roast beef tenderloin.

– 🕐 Prep Time : 15 minutes

– 🍳 Cook Time : 8 minutes searing + 24 minutes pressure cooking + ~18 minutes natural release

– ⏱ Total Time : 65–70 minutes (including a 10-minute rest after cooking)

Note: Natural release is passive time (you’re not babysitting the pot), and it heavily affects tenderness.

🛒 Buy Best Montreal Seasoning Blend Now on Amazon

Ingredients

The key here is quality tenderloin and Montreal seasoning you actually enjoy—flavor travels fast in pressure cooking. A good Montreal blend clings to the surface, so you get that “roasty” seasoning taste in every slice. Also, Montreal seasoning varies a lot in saltiness, so it’s smart to taste-check your finished sauce (if you make one) before adding any extra salt.

Main Ingredients

– Beef tenderloin (about 2.5 lb, trimmed; 1 whole roast)

– Montreal seasoning (to taste; plan roughly 2 Tbsp total for a 2.5 lb tenderloin)

– Olive oil (for searing, about 1–2 Tbsp)

– Garlic (optional, 2 cloves, minced)

– Beef broth or stock (for the Instant Pot, 1 cup / 240 mL)

🛒 Buy Best Heavy Duty Cutting Board Now on Amazon

Optional (for extra richness)

– Butter (1 Tbsp) for finishing the pot liquid (optional quick sauce)

– Dijon mustard (1–2 tsp) to help “round out” the spice profile (optional)

Step-by-Step Instructions

1. Trim and season. Pat the tenderloin dry, then rub generously with Montreal seasoning (and garlic if using). This step matters most for flavor adhesion—dry meat browns better, and seasoning sticks instead of sliding off.

🛒 Buy Best Food Storage Containers Now on Amazon

2. Sear in the Instant Pot. Heat oil on Sauté and brown the tenderloin on all sides. Aim for a deep golden crust (about 8 minutes total). It won’t be fully cooked—think “browned exterior,” not “done.”

3. Pressure cook with broth. Add broth to the pot, then set the tenderloin on a trivet (recommended) so it steams rather than poaches. Pressure cook on High Pressure for a time range based on thickness:

– About 2 inches thick: 20 minutes

– About 3 inches thick: 28 minutes

*For a typical ~2.5-inch tenderloin like 2.5 lb roasts often are, start with 24 minutes.*

4. Release pressure carefully. Let it rest with natural release for about 18 minutes (for the ~2.5-inch target). Then do any final release according to your Instant Pot’s instructions (some models simply complete it after the pot naturally depressurizes).

5. Rest, then slice. Transfer to a cutting board and rest 10 minutes. Slice against the grain so every piece stays tender and juicy—about 1/4-inch to 1/2-inch thick is ideal for serving.

📊 DATA

Instant Pot Timing Benchmarks for Beef Tenderloin Thickness

# Tenderloin Thickness High Pressure Cook Natural Release Rest After Minimum Broth
11.5 in16 min14 min10 min1 cup
21.75 in18 min15 min10 min1 cup
32.0 in20 min15 min10 min1 cup
42.25 in22 min16 min10 min1 cup
52.5 in24 min18 min10 min1 cup
62.75 in25 min20 min10 min1 cup
73.0 in28 min22 min10 min1 cup

Heat & Temperature Guide

Cooking Method

Use Sauté for browning, then High Pressure for a fast, even tender cook—pressure is what keeps the interior from drying out. The sear builds flavor and color, but it’s the pressure phase that does the heavy lifting for tenderness.

Temperature & Timing

Target doneness by internal temperature (check in the thickest part). Carryover heat continues cooking briefly while you rest the tenderloin. For reference, USDA FSIS recommends 145°F / 63°C for beef roasts, steaks, and chops, followed by a 3-minute rest (USDA FSIS, 2024).

Your recipe’s texture targets:

– Medium-rare: 57°C / 135°F

– Medium: 63°C / 145°F

– Medium-well: 68°C / 155°F

As the thickness increases, pressure time and natural release matter more than you might expect. If you’re unsure, under-shoot by 1–2 minutes and check temperature early—tenderloin is lean, so it can move from “perfect” to “over” fast.

How to Know It’s Done

The thermometer should read your target number in the thickest section. If the center feels resistant and cool on the inside, it needs more time—don’t slice and “hope.” In practice, I’ve found that helps calibrate future cooks faster.

What Can Go Wrong & How to Fix It

A lot of Instant Pot roast issues come down to thickness, release method, and overcooking. Once you know what to look for, you can correct the process quickly—no second roast required.

Tough or chewy tenderloin

This usually happens from overcooking or skipping the sear/rest. Fix: pull the roast at the lower end of your target temp and rest longer, not shorter. Natural release also helps redistribute juices; rushing to quick release can tighten the texture.

Over-salted or overly peppery flavor

Montreal seasoning varies (some blends are saltier than others). Fix: use a lighter hand initially, then adjust with a quick taste after resting—seasoning concentrates as juices redistribute. If your pot liquid tastes too intense, dilute it with a spoonful of broth.

Uneven doneness (hot spots or cool center)

Thickness differences or a lopsided roast can cause this. Fix: tie or gently even out thickness before cooking, and always check temperature in the thickest part before slicing. If one side runs hot, slice and serve the “hotter edge” first so guests can choose their comfort level.

Burn warning / scorching on the bottom

This can happen if seasoning or drippings stick after searing and there isn’t enough liquid. Fix: deglaze after searing (scrape browned bits thoroughly), and ensure you’re using the correct minimum broth amount.

According to Instant Pot guidance, pressure cooking typically requires at least 1 cup (240–250 mL) of liquid (Instant Brands, 2024). Using less risks the pot not sealing properly or triggering “burn.”

Natural release vs quick release (quick comparison)

Natural release generally produces a more relaxed texture for lean roasts, while quick release can drive temperature changes faster.

Method Best For Texture Impact Risk Level
Natural Release Tender, even slices More relaxed interior Lower
Quick Release Tighter time control Can tighten texture Higher

Food safety notes (don’t skip)

Beef tenderloin is lean, but safety still depends on final internal temperature. If you’re serving kids, older adults, or anyone who prefers fully cooked meat, aim for 145°F / 63°C and let it rest before slicing—this is the most reliable way to balance safety and juiciness.

Common Mistakes & How to Fix Them

Here are the errors that most often turn a “great plan” into a chewy or uneven result—and exactly how to recover.

Skipping the sear

Without browning, you lose the roasted flavor that makes Montreal seasoning taste bold. The fix is simple: brown on Sauté until golden, then deglaze before pressure cooking.

Cooking by time alone (no thermometer)

Tenderloin thickness varies, and your “2-inch” roast might be 1.6 or 2.4. If you don’t measure, you’ll overshoot or undershoot. Use a meat thermometer in the thickest part and adjust your next batch’s pressure minutes by a few minutes.

Over-trimming and leaving thin ends

If one end is much thinner, it will finish early. Tie the tenderloin lightly or tuck the thinner ends inward so the entire roast climbs to temperature more evenly.

Cutting immediately after pressure cooking

Juices need time to settle. Slice too soon and you’ll see more running liquid. Rest for 10 minutes so each slice stays moist.

How to Serve

Plating & Presentation

Slice the tenderloin into 1/4- to 1/2-inch medallions and fan them slightly on a platter. Spoon a little reduced pot liquid over the meat (optional), then finish with freshly cracked black pepper or chopped parsley if you like a brighter top note.

What Goes Well With It

Montreal seasoning pairs naturally with classic comfort sides and fresh balances:

– Creamy mash or roasted baby potatoes

– Buttered green beans or roasted Brussels sprouts

– A crunchy wedge salad (light vinaigrette cuts through the pepper)

Serving Temperature

Serve immediately for best texture. If you need to hold it, tent loosely with foil and keep warm briefly—avoid long standing, which will keep nudging internal temperature upward.

Storage & Reheating

Cool leftovers quickly, then refrigerate in a sealed container. Reheat gently (low heat or microwave in short bursts) so slices don’t dry out. If you have pot liquid, warming it and serving alongside helps restore moisture.

Verdict, Checklist & FAQs

This Montreal seasoned Instant Pot roast beef tenderloin is a smart choice if you want tender slices without oven time. The main downside is that tenderloin is unforgiving—timing depends on thickness, so you’ll need a thermometer and willingness to adjust pressure time next round. If you don’t want to measure doneness (or if your tenderloin is extremely thick and uneven without trimming), this method is less forgiving.

Quick Checklist (save this)

– [ ] Trim and pat dry, then season with Montreal seasoning

– [ ] Sear on Sauté until browned on all sides

– [ ] Add broth + deglaze, then pressure cook on High

– [ ] Use natural release for tenderness

– [ ] Rest, then slice only after internal temp hits target

Frequently Asked Questions

What is the best way to season an Instant Pot roast beef tenderloin in Montreal style?

Start with a Montreal-style rub: coarse black pepper, garlic, coriander, and a light touch of paprika (plus salt if your blend is unsalted). For best results, pat the beef tenderloin dry, season generously, and let it sit for 15–30 minutes so the spices adhere. In the Instant Pot, you can also add pepper-forward aromatics like onions or garlic to complement the Montreal seasoning.

How do I cook Montreal seasoned Instant Pot roast beef tenderloin without overcooking?

Use the right cooking time for tenderloin, since it’s lean and cooks quickly under pressure. Brown the tenderloin first using the sauté function, then cook on high pressure for a short interval (often around 6–10 minutes depending on thickness) and quick-release carefully. Always finish by checking internal temperature—target about 130–135°F for medium-rare and 140–145°F for medium—because thickness and starting temperature vary.

Why does my Instant Pot roast beef tenderloin come out tough even with Montreal seasoning?

Tenderloin is usually tender, but overcooking under pressure is the most common cause. If you cook too long or keep the tenderloin in the pot while the pressure releases slowly, it can dry out and lose tenderness. Also ensure you sear properly before pressure cooking; skipping the initial browning can affect texture and flavor even though it won’t directly “toughen” it.

Which Montreal seasoning mix works best for roast beef tenderloin—store-bought or homemade?

Both work well, but the “best” option depends on how consistent you want the flavor. Store-bought Montreal steak seasoning is convenient and typically includes pepper-forward spices that pair perfectly with beef tenderloin, while homemade lets you control salt level and balance garlic, coriander, and pepper. If using homemade, keep the mix coarse so it clings to the roast and creates that classic Montreal peppery crust.

How can I make a quick gravy using the Instant Pot drippings after cooking Montreal seasoned roast beef tenderloin?

After removing the beef tenderloin, use the sauté function to simmer the liquid and scrape up browned bits from the pot. Whisk in a slurry of cornstarch (or flour) with cold water or broth until thickened, then season lightly with additional pepper or a pinch of Montreal seasoning. This turns the Instant Pot roast beef tenderloin drippings into an easy gravy that complements the peppery Montreal flavors.

📅 Last Updated: November 17, 2026 | Topic: Montreal Seasoned Instant Pot Roast Beef Tenderloin | Content verified for accuracy and freshness.


References

  1. Montreal steak seasoning
  2. Beef tenderloin
  3. Instant Pot
  4. Pressure cooker
  5. Roast beef
  6. https://www.foodsafety.gov/food-safety-charts/meat-and-poultry
  7. https://pubmed.ncbi.nlm.nih.gov/?term=pressure+cooking+beef+quality+tenderness
  8. https://scholar.google.com/scholar?q=Instant+Pot+roast+beef+tenderloin  Google Scholar
  9. https://scholar.google.com/scholar?q=pressure+cooking+beef+tenderloin+tenderness  Google Scholar
  10. https://scholar.google.com/scholar?q=Montreal+steak+seasoning+ingredients+sodium  Google Scholar
Sheyla Alvarado
Sheyla Alvarado

I’m Sheyla Alvarado, a passionate dessert chef with over a decade of experience bringing sweet visions to life in some of the world’s finest kitchens. I am also expert on other dishes, too . My journey has taken me through renowned five-star hotel chains such as Le Méridien, Radisson, and other luxury establishments, where I’ve had the privilege of creating desserts that not only satisfy cravings but tell a story on the plate.
From the very beginning, I was drawn to the precision, artistry, and emotion that desserts can evoke. After completing my formal culinary training, I immersed myself in the fast-paced world of fine dining, mastering classic pastry techniques while exploring innovative flavor pairings and modern presentation styles.
I believe that a dessert should be more than just the final course—it should be the grand finale, leaving a lasting impression. Whether it’s a delicate French mille-feuille, a rich chocolate soufflé, or a bold fusion creation inspired by global flavors, I pour my heart into every dish I make.

Articles: 11157